+972-49887877
info@crg.co.il

Dual Root Complex Purley 4U GPU Server for Deep Learning HPC and Render Farm Applications

Part No. PNYSRA48000000-100

Increased Total Expansion Capability from Its Previous Generation

The successor to PNYSER48 series, PNYSRA48 series adds a 9th slot to the rear of the chassis, allowing a single-width PCIe x16 card to be installed next to 8 double-width GPU cards. This new design change is ideal for NVMe deployment or high speed networking like 100 Gigabit EDR Infiniband, 100 Gigabit Ethernet, or 100 Gigabit Intel Omni-Path fabric. Furthermore, an internal storage mezzanine slot(for SAS storage deployment without taking up PCIe slots) is also available for integrating device controller solutions. PNYSRA48 series does not require a specialized domed chassis lid for the power connectors of active GPU cards.

Dual-Root Complex Design

Increased Total Expansion Capability from Its Previous Generation

The successor to PNYSER48 series, PNYSRA48 series adds a 9th slot to the rear of the chassis, allowing a single-width PCIe x16 card to be installed next to 8 double-width GPU cards. This new design change is ideal for NVMe deployment or high speed networking like 100 Gigabit EDR Infiniband, 100 Gigabit Ethernet, or 100 Gigabit Intel Omni-Path fabric. Furthermore, an internal storage mezzanine slot(for SAS storage deployment without taking up PCIe slots) is also available for integrating device controller solutions. PNYSRA48 series does not require a specialized domed chassis lid for the power connectors of active GPU cards.

Dual-Root Complex Design

As a dual-root complex GPU server, PNYSRA48 series deploys a pair of Intel® Xeon® Scalable Processors which split the workload of managing 8 GPU cards. The motherboard deploys a set of four PLX PEX8747 PCIe switch chips to provide the connectivity for the 8 GPU card PCIe x16 slots. PNYSRA48 series also comes with an on-board mezzanine board for Intel Omni-Path 100 Gigabit networking fabric.

Dimensions  4U
770 x 438 x 176 (D x W x H, mm)
CPU Intel® Xeon® Processor Scalable Family
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
Up to 10.4/9.6 GT/s with Intel UltraPath Interconnect (UPI) support
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Socket 2 x LGA 3647
Chipset
PCH Intel® C621 Express Chipset
Switch IC: 4 x PLX PEX8747
Memory
Supported DIMM: 24 x DIMM slots
DIMM Type / Speed: DDR4 RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 2666
Capacity: Up to 768GB RDIMM/ 1,536GB LRDIMM/ 3,072GB RDIMM 3DS/LRDIMM 3DS *Follow latest Intel DDR4 Memory POR
Memory Channel: 6 channels per CPU
Memory Voltage: 1.2V
LAN
Port: 2 x 10GbE ports / 1 x PHY
Controller: Intel X550-AT2
PHY: Realtek RTL8211E
Video
Connector Type: D-Sub 15-pin
Resolution: Up to 1920×1200
Chipset: Aspeed AST2500
External Drive Bays
Type: 14 x 2.5″ Hot-Swap HDD/SSD bays (up to 4 x NVMe U.2 devices supported)
Backplane Support: SAS 12Gb/s /SATA 6Gb/s
Supported HDD Interface: 14 x SATA 6Gb/s
Storage
SATA Connector: 2 x Mini-SAS HD (8-ports)
Controller: Intel C621
Speed: 6.0 Gb/s
RAID: S/W RAID 0/1/10/5 (Intel RSTe)
sSATA Connector: 2 x SATA III / 1 x Mini-SAS HD (4-ports)
Speed: 6.0 Gb/s
RAID: S/W RAID 0/1/10/5 (Intel RSTe)
SAS Supported via add-on SAS Card
SATA 14 x SATA 6Gb/s
RAID According to the RAID card option implemented
Expansion Slots
PCIe: 9 x PCIe Gen3 x16 slots / 2 x PCIe Gen3 x8 Proprietary Mezzanine slots
Pre-install Riser Card: M2215-L8-1F / M2217-L16-IO
Front Panel
Buttons: 1 x RST / 1 x ID / 1 x PWR w/ LED
LEDs: 1 x HDD / 1 x ID / 3 x LAN / 1 x IPMI/Warning
I/O Ports: 2 x USB 3.0 port
I/O Ports
USB: 2 x USB3.0 ports (at front)
COM: 1 x DB-9 COM port (at front)
VGA: 1 x D-Sub 15-pin port
RJ-45: 2 x 10GbE ports, 1 x PHY dedicated for IPMI
TPM 1 x TPM header with LPC interface
Optional TPM 1.2/2.0 kits available
Power Supply
Type: Redundant PSU
Input Range: AC 100-127V/12.9A / AC 200-240V/9.5A
Frequency: 47-63 Hz
Output Watts: 2,000 Watts (100-127Vac input) / 3,200Watts (200-240Vac input)
Efficiency: PFC / 80 plus Platinum
Redundancy: 2+1
System Monitoring
Chipset: Aspeed AST2500
Temperature: Monitors temperature for CPU & memory & system environment
Voltage: Monitors voltage for CPU, memory, chipset & power supply
LED: Over temperature warning indicator / Fan & PSU fail LED indicator
Others: Watchdog timer support
System Management
Onboard Chipset Onboard: Aspeed AST2500
AST2500 iKVM Features: IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2500 IPMI Features: 24-bit high quality video compression / 10/100/1000 Mb/s MAC interface
BIOS
Brand / ROM Size: AMI / 32MB
Features: Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1
OS Supported Windows Server 2016 x64
Windows Server 2012 R2 x64
Win 10 x64 (1703)
Win 10 x64 (1709)
RHEL 6.9 X64
RHEL 7.3 x64
RHEL 7.4 x64
CentOS 6.9 x64
CentOS 7.3 x64
CentOS 7.4 x64
Suse 11 SP4
Suse 12 SP2
Suse 12 SP3
Weight 45 kg (full package)
Packaging Content 1 x PNYSRA48000000-100
1 x Quick installation guide
2 x CPU heatsinks
1 x Rail kit
System Fans 6 x 12cm fans
Operating Properties
Operating Temperature: 10°C ~ 35°C (50°F~ 95°F)
Non-operating Temperature: – 40°C ~ 70°C (-40°F ~ 158°F)
In/Non-operating Humidity: 90%, non-condensing at 35°C
Skip to content