Increased Total Expansion Capability from Its Previous Generation
The successor to PNYSER48 series, PNYSRA48 series adds a 9th slot to the rear of the chassis, allowing a single-width PCIe x16 card to be installed next to 8 double-width GPU cards. This new design change is ideal for NVMe deployment or high speed networking like 100 Gigabit EDR Infiniband, 100 Gigabit Ethernet, or 100 Gigabit Intel Omni-Path fabric. Furthermore, an internal storage mezzanine slot(for SAS storage deployment without taking up PCIe slots) is also available for integrating device controller solutions. PNYSRA48 series does not require a specialized domed chassis lid for the power connectors of active GPU cards.
Dual-Root Complex Design
Increased Total Expansion Capability from Its Previous Generation
The successor to PNYSER48 series, PNYSRA48 series adds a 9th slot to the rear of the chassis, allowing a single-width PCIe x16 card to be installed next to 8 double-width GPU cards. This new design change is ideal for NVMe deployment or high speed networking like 100 Gigabit EDR Infiniband, 100 Gigabit Ethernet, or 100 Gigabit Intel Omni-Path fabric. Furthermore, an internal storage mezzanine slot(for SAS storage deployment without taking up PCIe slots) is also available for integrating device controller solutions. PNYSRA48 series does not require a specialized domed chassis lid for the power connectors of active GPU cards.
Dual-Root Complex Design
As a dual-root complex GPU server, PNYSRA48 series deploys a pair of Intel® Xeon® Scalable Processors which split the workload of managing 8 GPU cards. The motherboard deploys a set of four PLX PEX8747 PCIe switch chips to provide the connectivity for the 8 GPU card PCIe x16 slots. PNYSRA48 series also comes with an on-board mezzanine board for Intel Omni-Path 100 Gigabit networking fabric.
Dimensions | 4U 770 x 438 x 176 (D x W x H, mm) |
CPU | Intel® Xeon® Processor Scalable Family Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor CPU TDP up to 205W Up to 10.4/9.6 GT/s with Intel UltraPath Interconnect (UPI) support NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable |
Socket | 2 x LGA 3647 |
Chipset |
PCH Intel® C621 Express Chipset
Switch IC: 4 x PLX PEX8747
|
Memory |
Supported DIMM: 24 x DIMM slots
DIMM Type / Speed: DDR4 RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 2666
Capacity: Up to 768GB RDIMM/ 1,536GB LRDIMM/ 3,072GB RDIMM 3DS/LRDIMM 3DS *Follow latest Intel DDR4 Memory POR
Memory Channel: 6 channels per CPU
Memory Voltage: 1.2V
|
LAN |
Port: 2 x 10GbE ports / 1 x PHY
Controller: Intel X550-AT2
PHY: Realtek RTL8211E
|
Video |
Connector Type: D-Sub 15-pin
Resolution: Up to 1920×1200
Chipset: Aspeed AST2500
|
External Drive Bays |
Type: 14 x 2.5″ Hot-Swap HDD/SSD bays (up to 4 x NVMe U.2 devices supported)
Backplane Support: SAS 12Gb/s /SATA 6Gb/s
Supported HDD Interface: 14 x SATA 6Gb/s
|
Storage |
SATA Connector: 2 x Mini-SAS HD (8-ports)
Controller: Intel C621
Speed: 6.0 Gb/s
RAID: S/W RAID 0/1/10/5 (Intel RSTe)
sSATA Connector: 2 x SATA III / 1 x Mini-SAS HD (4-ports)
Speed: 6.0 Gb/s
RAID: S/W RAID 0/1/10/5 (Intel RSTe)
|
SAS | Supported via add-on SAS Card |
SATA | 14 x SATA 6Gb/s |
RAID | According to the RAID card option implemented |
Expansion Slots |
PCIe: 9 x PCIe Gen3 x16 slots / 2 x PCIe Gen3 x8 Proprietary Mezzanine slots
Pre-install Riser Card: M2215-L8-1F / M2217-L16-IO
|
Front Panel |
Buttons: 1 x RST / 1 x ID / 1 x PWR w/ LED
LEDs: 1 x HDD / 1 x ID / 3 x LAN / 1 x IPMI/Warning
I/O Ports: 2 x USB 3.0 port
|
I/O Ports |
USB: 2 x USB3.0 ports (at front)
COM: 1 x DB-9 COM port (at front)
VGA: 1 x D-Sub 15-pin port
RJ-45: 2 x 10GbE ports, 1 x PHY dedicated for IPMI
|
TPM | 1 x TPM header with LPC interface Optional TPM 1.2/2.0 kits available |
Power Supply |
Type: Redundant PSU
Input Range: AC 100-127V/12.9A / AC 200-240V/9.5A
Frequency: 47-63 Hz
Output Watts: 2,000 Watts (100-127Vac input) / 3,200Watts (200-240Vac input)
Efficiency: PFC / 80 plus Platinum
Redundancy: 2+1
|
System Monitoring |
Chipset: Aspeed AST2500
Temperature: Monitors temperature for CPU & memory & system environment
Voltage: Monitors voltage for CPU, memory, chipset & power supply
LED: Over temperature warning indicator / Fan & PSU fail LED indicator
Others: Watchdog timer support
|
System Management |
Onboard Chipset Onboard: Aspeed AST2500
AST2500 iKVM Features: IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2500 IPMI Features: 24-bit high quality video compression / 10/100/1000 Mb/s MAC interface
|
BIOS |
Brand / ROM Size: AMI / 32MB
Features: Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1
|
OS Supported | Windows Server 2016 x64 Windows Server 2012 R2 x64 Win 10 x64 (1703) Win 10 x64 (1709) RHEL 6.9 X64 RHEL 7.3 x64 RHEL 7.4 x64 CentOS 6.9 x64 CentOS 7.3 x64 CentOS 7.4 x64 Suse 11 SP4 Suse 12 SP2 Suse 12 SP3 |
Weight | 45 kg (full package) |
Packaging Content | 1 x PNYSRA48000000-100 1 x Quick installation guide 2 x CPU heatsinks 1 x Rail kit |
System Fans | 6 x 12cm fans |
Operating Properties |
Operating Temperature: 10°C ~ 35°C (50°F~ 95°F)
Non-operating Temperature: – 40°C ~ 70°C (-40°F ~ 158°F)
In/Non-operating Humidity: 90%, non-condensing at 35°C
|